For Nearly Two Decades the Nuclear Launch Code at all Minuteman Silos in the United States Was 00000000

*Editor’s Note ( Ralph Turchian0) – Requested Repost from 2013 

Karl Smallwood November 29, 2013

nuclear-launch

Today I found out that during the height of the Cold War, the US military put such an emphasis on a rapid response to an attack on American soil, that to minimize any foreseeable delay in launching a nuclear missile, for nearly two decades they intentionally set the launch codes at every silo in the US to 8 zeroes.

We guess the first thing we need to address is how this even came to be in the first place. Well, in 1962 JFK signed the National Security Action Memorandum 160, which was supposed to ensure that every nuclear weapon the US had be fitted with a Permissive Action Link (PAL), basically a small device that ensured that the missile could only be launched with the right code and with the right authority.

There was particularly a concern that the nuclear missiles the United States had stationed in other countries, some of which with somewhat unstable leadership, could potentially be seized by those governments and launched. With the PAL system, this became much less of a problem.

Beyond foreign seizure, there was also simply the problem that many U.S. commanders had the ability to launch nukes under their control at any time.  Just one commanding officer who wasn’t quite right in the head and World War III begins.  As U.S. General Horace M. Wade stated about General Thomas Power:

I used to worry about General Power. I used to worry that General Power was not stable. I used to worry about the fact that he had control over so many weapons and weapon systems and could, under certain conditions, launch the force. Back in the days before we had real positive control [i.e., PAL locks], SAC had the power to do a lot of things, and it was in his hands, and he knew it.

To give you an idea of how secure the PAL system was at this time, bypassing one was once described as being “about as complex as performing a tonsillectomy while entering the patient from the wrong end.“  This system was supposed to be essentially hot-wire proof, making sure only people with the correct codes could activate the nuclear weapons and launch the missiles.

However, though the devices were supposed to be fitted on every nuclear missile after JFK issued his memorandum, the military continually dragged its heels on the matter.  In fact, it was noted that a full 20 years after JFK had order PALs be fitted to every nuclear device, half of the missiles in Europe were still protected by simple mechanical locks. Most that did have the new system in place weren’t even activated until 1977.

Those in the U.S. that had been fitted with the devices, such as ones in the Minuteman Silos, were installed under the close scrutiny of Robert McNamara, JFK’s Secretary of Defence. However, The Strategic Air Command greatly resented McNamara’s presence and almost as soon as he left, the code to launch the missile’s, all 50 of them, was set to 00000000.

Read More: http://www.todayifoundout.com/index.php/2013/11/nearly-two-decades-nuclear-launch-code-minuteman-silos-united-states-00000000/

One thought on “For Nearly Two Decades the Nuclear Launch Code at all Minuteman Silos in the United States Was 00000000

Comments are closed.